PioneerX 101
(4G CAT-1)
Hardwire Tracker with I/Os and BLE 5.0
Completed Certificates
PioneerX 101 has obtained major international certifications including CE, FCC, RCM, Anatel, ICASA, CITC, TDRA, and NBTC, demonstrating compliance for vehicle tracking deployments across Europe, Latin America, Africa, the Middle East, and Asia-Pacific. This broad certification footprint enables reliable installation and operation for fleet management, logistics tracking, and multi-region telematics projects.
PioneerX 101 is an entry to medium level hardwired tracker that has I/Os that could be used for ignition detection, relay, buzzer, SOS button, or other accessories. When working with BLE sensors it can monitor the temperature, humidity, door status, SOS, driver ID, etc. It’s an all-in-one model to serve your needs for customized solution.
Features
Real time and buffer locations
Real time location updates can be as frequent as 3s. Up to 40,000 location points can be saved in buffer if out of network coverage.
LTE Global Bands
4G CAT-1 network global bands with 2G fallback is supported
BLE 5.0 for sensors
Compatible with TOPFLYtech’s TSTH1-B temp & hum sensor, TSDT1-B door sensor, TSR1-B wireless relay, T-button, T-sense and others.
Real time and buffer locations
Real time location updates can be as frequent as 3s. Up to 40,000 location points can be saved in buffer if out of network coverage.
LTE Global Bands
4G CAT-1 network global bands with 2G fallback is supported
BLE 5.0 for sensors
Compatible with TOPFLYtech’s TSTH1-B temp & hum sensor, TSDT1-B door sensor, TSR1-B wireless relay, T-button, T-sense and others.
Ignition on/off alerts
Alerts for engine is switched on or off
Ignition on/off alerts
Alerts for engine is switched on or off
Disconnection alerts
Alerts for device disconnected from power
Driving behaviour detection
Detecting reckless driving events
Disconnection alerts
Alerts for device disconnected from power
Driving behaviour detection
Detecting reckless driving events
External power DC 7V - 100V
Wide range of external power supported
Waterproof
IP67 waterproof rating
Multiple I/Os
Multiple digital I/Os, compatible with wiring relay, buzzer and siren for vehicle immobilisation for anti-theft
External power DC 7V - 100V
Wide range of external power supported
Waterproof
IP67 waterproof rating
Multiple I/Os
Multiple digital I/Os, compatible with wiring relay, buzzer and siren for vehicle immobilisation for anti-theft
Backup battery
Backup power for sending disconnection alerts when battery disconnected
Backup battery
Backup power for sending disconnection alerts when battery disconnected
RS232 (Optional)
Power, Transmit, Receive ports to connect accessories like RFID readers, cameras,
1-wire (Optional)
Power and data ports to connect 1-wire accessories
RS232 (Optional)
Power, Transmit, Receive ports to connect accessories like RFID readers, cameras,
1-wire (Optional)
Power and data ports to connect 1-wire accessories
CAN reading (Optional)
Project focused only
Manual CAN (Optional)
For EV/BMS/Non-standard CAN Vehicles
CAN reading (Optional)
Project focused only
Manual CAN (Optional)
For EV/BMS/Non-standard CAN Vehicles
Technical Specifications
Network/Operating Band
LTE FDD Cat 1:
B1/B2/B3/B4/B5/B7/B8/B12/B13/B17/B18/B19/
B20/B25/B26/B28/B66
LTE TDD Cat 1:
B34/B38/B39/B40/B41
GSM (2G):
850/900/1800/1900 MHz
GNSS Specifications
GNSS Chipset：All-In-One GNSS receiver
Parallel GNSS：GPS+Beidou+Galileo+QZSS（SBAS）
Receiver Type：24 tracking / 66 acquisitions- channel GNSS receiver
Position Accuracy (CEP)：Autonomous < 1.5m
Standalone TTFF：Cold start: < 20s
Warm start: < 2s
Hot start: < 2s
Interfaces
I/Os: depending on version
Indicator LED：Network and GNSS
FOTA：Yes
BLE (Bluetooth Low Energy)：5.0
WIFI: 2.4 GHz 802.11b (Rx)
Tracker Configuring: Type C Connector
General Specifications
Dimensions: 102.6 x 42.6 x 13.0 mm (4.04” x 1.67” x 0.51”)
Weight：50g (2.47oz)
Operating Voltage: 7~100V DC
Internal memory: 8MG
Operating Temperature：-30℃ ~ +80℃ (-22°F ~ 176°F)
Storage Temperature：-40℃ ~ +85℃ (-40°F ~ 185°F)
Air Interface Protocol
Transmit Protocol：TCP, UDP, MQTT, SMS
Protocol Check & Encryption Support: MD5/ AES256
BLE Accessory Support：Yes
Scheduled Timing/angle/distance Report：Report position and status at preset intervals
External Power Status Alarm：Report when external power is disconnected
Speeding Alarm：Report when speed exceed the pre-set value
Towing Alarm：From internal 6-axis accelerometer
Remote Control：Remote output control
Network Signal Jamming Detection：Report network jamming
Data Roaming Control：Avoid additional data consumption
Driving Behavior Monitoring：Aggressive driving behavior detection, e.g. harsh braking and acceleration
Crash Detection：Accident data collection for reconstruction and analysis
Certification
CE, FCC, RCM, Anatel, ICASA, CITC, TDRA, NBTC
