T8608 (2G)
Basic OBDII Tracker with BLE
The basic Plug & Play OBDII tracker for simply tracking vehicles, with no complex and unneeded
features. When working with BLE sensors it can monitor the temperature, humidity, door status,
etc. It’s an easy to use vehicle tracker that requires no installation and maintenance.
Features
Real time and buffer locations
Real time location updates can be as frequent as 3s. Up to 60,000 location points can be saved in buffer if out of network coverage
Plug & Play
No installation and maintenance needed
Driving behaviour detection
Detecting reckless driving events such as harsh acceleration, turning, braking, crash and speeding
BLE 4.0 for sensors
Compatible with TOPFLYtech’s BLE temp & humi senor TSTH1-B, temp & door sensor TSDT1-B, wireless relay TSR1-B and your own sensors
Compact size
One of the smallest OBDII trackers in the market
Disconnection alerts
Alerts for device disconnected from power
Backup battery
Backup power for sending disconnection alerts when power disconnected
Ignition on/off alerts
Alerts for engine is switched on or off
Technical Specifications
Quad band: 850/900/1800/1900 MHz
GNSS Chipset: All-In-One GNSS receiver
Parallel GNSS: GPS+Glonass/ GPS+Galileo/ GPS+Beidou
Receiver type: 33 tracking / 99 acquisitions- channel GNSS receiver
Sensitivity: Cold start: -148 dBm
Reacquisition: -163 dBm
Tracking: -165 dBm
Position Accuracy (CEP): Autonomous: < 2.5m
TTFF (Open Sky): Cold start: < 28s
Warm start: < 26s
EPO assist: < 13s
Hot start: < 1s
Connector：OBDII
SIM card slot：Nano SIM card slot
GSM/GNSS/Bluetooth Antenna：Internal only
Indicator LED：Network and GNSS
FOTA：Yes
BLE (Bluetooth Low Energy)：4.0
USB：Debug
Dimensions：57mm*50mm*24mm (2.24” *1.97” *0.94”)
Weight：50g (1.76oz)
Backup Battery：Li-Polymer 120 mAh/ 3.7V
Operating Voltage：7V to 32V DC
Operating Temperature：-30℃ ~ +80℃ (-22°F ~ 176°F)
Storage Temperature：-40℃ ~ +85℃ (-40°F ~ 185°F)
Transmit Protocol：TCP, UDP, SMS
BLE Accessory Support：Yes
Scheduled Timing/angle/distance Report：Report position and status at preset intervals
External Power Status Alarm：Report when external power is disconnected
Low Power Alarm：Report when backup battery is low
Speeding Alarm：Report when speed exceed the pre-set value
Network Signal Jamming Detection：Report network jamming
Data Roaming Control：Avoid additional data consumption
Driving Behavior Monitoring：Aggressive driving behavior detection, e.g. harsh braking and acceleration
Crash Detection：Accident data collection for reconstruction and analysis
